Settings Menu 4 Chapter
TAPE PROTECTION [Tape protct]: Settings related to tape | Description of settings | ||
and video head protection |
|
| |
|
|
|
|
FROM STOP [> From STOP]: | STOP TIMER [>> STP | 5 MIN [>>> 5 min] to 0.5 SEC [>>> 0.5 sec]: Select time from | |
Set the time to switch from | timer]: Set the time to | 12 settings ranging from 0.5 second to 5 minutes in steps | |
stop mode to tape protection | switch from stop mode | of 0.1 second. | |
mode. | to tape protection | Factory default setting: 1MIN [>>> 1min] | |
|
| mode. |
|
|
|
|
|
FROM STILL [> From STILL]: | STILL TIMER [>> STL | 5 MIN [>>> 5 min] to 0.5 SEC [>>> 0.5 sec]: Select time from | |
Set the time to switch from | timer]: Set the time to | 12 settings ranging from 0.5 second to 5 minutes in steps | |
still search mode to tape | switch from still search | of 0.1 second. | |
protection mode. Also select | mode to tape | Factory default setting: 1MIN [>>> 1min] | |
the type of tape protection | protection mode. |
| |
mode. |
|
|
|
| NEXT MODE [>> Next | *STEP FWD [>>> Step]: The tape is advanced at 1/30 times | |
|
| ||
|
| mode]: Select the type | normal speed for about 2 seconds. |
|
| of tape protection | |
|
| STANDBY OFF [>>> STANDBY]: Standby off mode | |
|
| mode to follow still | |
|
|
| |
|
| search mode when the |
|
|
| time set with the STILL |
|
|
| TIMER menu item |
|
|
| elapses. |
|
|
|
|
|
|
| ||
VIDEO CONTROL [Video]: Settings related to video control | Description of settings | ||
|
| ||
EE DELAY [>EE delay]: An | *SYNC DELAY [>> sync]: Delay the sync signal by the | ||
with respect to the video input signal by the time for video | corresponding amount of time before attaching it. | ||
circuit processing. With this item, select whether or not to | VIDEO DELAY [>> video]: Attach a sync signal with the same | ||
delay the sync signal attached to the output video signal by | timing as the input signal. | ||
an amount corresponding to the video signal delay. |
| ||
|
| ||
INT VIDEO SG [>Video SG]: Select the test signal to be | *75% COLOR BARS [>>75% bars]: 75% color bar signal | ||
output from the internal test signal generator. When SG is | BLACK BURST [>>BB]: Black burst signal | ||
selected using the VIDEO IN button, the internal test signal |
| ||
generator outputs the selected test signal. This signal can |
| ||
be recorded. |
|
| |
|
| ||
*FORCED STD [>> STD]: The STD mode is always used | |||
mode in accordance with the composite video or | (forced STD mode). | ||
input. |
| FORCED | |
|
|
| the input video signal is unstable (forced |
|
|
| mode). |
|
| ||
OUT REF SEL [>Out Ref.]: Select the reference video signal | *REF VIDEO [>> REF]: Use the signal input to a REF. VIDEO | ||
to use. |
| IN connector as the reference video signal. The input | |
|
|
| video signal to be edited is required to be in |
|
|
| synchronization with the reference video signal. |
|
|
| INPUT VIDEO [>> INPUT]: Use the input video signal |
|
|
| selected with the VIDEO IN button in the INPUT SELECT |
|
|
| section. |
|
|
| |
(For |
| *OFF [>> OFF]: Do not remove black setup. | |
SETUP REMOVE [> Setup rmv]: Determine whether or not to | ON (REMOVE) [>> ON]: Remove black setup. | ||
remove black setup (7.5 IRE) from input analog video |
| ||
signals when converting them into digital signals. |
| ||
|
|
| |
(For |
| *OFF [>> OFF]: Do not add black setup. | |
SETUP ADD [> Setup add]: Determine whether or not to add | ON (ADD) [>> ON]: Add black setup. | ||
black setup to analog video output signals. |
| ||
|
|
| |
(For |
| *OFF [>> OFF]: Do not mute. | |
CC(F1) BLANK [>CC1 blank]: Select whether to mute the | ON [>> ON]: Mute. | ||
closed caption signal to be superimposed on the 1st field |
| ||
of the output video signal. |
|
| |
|
|
| |
(For |
| *OFF [>> OFF]: Do not mute. | |
CC(F2) BLANK [>CC2 blank]: Select whether to mute the | ON [>> ON]: Mute. | ||
closed caption signal to be superimposed on the 2nd field |
| ||
of the output video signal. |
|
| |
|
|
|
|
62 Menu Contents