Sony DSR-1800 Connection of a video monitor, Settings on an editing control unit

Connection of a video monitor

Set up the following connections to enable monitoring of video and audio signals on a video monitor. In addition to the video and audio signals, you can have time data, the operation mode of the unit, alarm messages, and other information displayed as text on the monitor screen by setting the CHARA. DISPLAY menu item (see page 59) to ON (factory default setting).

75 Ω termination switch: ON (or attach a 75

Ωterminator)

Input switches: Set according to the type of input signals.

Video monitor

Composite	Audio input
video input 2	1
VIDEO
OUT	AUDIO
2(SUPER)	MONITOR OUT

DSR-1800/1800P (recorder)

ACable with RCA phono plugs (not supplied)

B 75 Ω coaxial cable (not supplied)

Settings on an editing control unit

When connecting an editing control unit, make the settings as follows, according to the model.

PVE-500

No settings are required.

BVE-600/900/910/2000 (NTSC model) or FXE-100/ 120

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
80	15	00	96	05	05	03	80	0A	08	FE	00	80	5A	FF

BVE-600/900/910/2000 (PAL model) or FXE-100P/ 120P

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
81	15	00	7D	05	05	02	80	0A	07	FE	00	80	4C	FF

RM-450/RM-450CE

Set the DIP switches as follows.

• Left switches

7	6	5	4	3	2	1	0
OFF	−	−	OFF	−	−	−	−

• Right switches (RM-450)

)

7	6	5	4	3	2	1	0
OFF	−	OFF	ON	OFF	OFF	ON	ON

• Right switches (RM-450CE)

7	6	5	4	3	2	1	0
ON	−	OFF	ON	OFF	OFF	ON	ON

BVE-800

Set the DIP switches as follows.

• SW2

1	2	3	4	5	6	7	8
ON	OFF	ON	ON	−	ON	ON	−

• SW3 (NTSC model)

1	2	3	4	5	6	7	8
ON	ON	ON	OFF	−	ON	OFF	OFF

• SW3 (PAL model)

1	2	3	4	5	6	7	8
OFF	OFF	OFF	ON	−	ON	OFF	OFF

Settings and Connections 5 Chapter

Connections for an A/B Roll Editing System 85