Overview 1 Chapter

Settings of the AUDIO IN LEVEL/600 Ω switches

Audio input

 

 

Switch setting

 

 

 

 

Level

Impedance

 

 

 

 

 

− 60 dBu

High impedance

LOW-OFF

(microphone input)

(about 20 kΩ

)

(left position)

 

 

 

+4/0/− 3 a)/− 6 dBu

High impedance

HIGH-OFF

(line audio input)

(about 20 kΩ

)

(middle

 

 

 

position)

 

 

 

 

+4/0/− 3 a)/− 6 dBm

600 Ω

 

HIGH-ON

(line audio input)

 

 

(right position)

 

 

 

 

a) Selectable on DSR-1800P only

bAUDIO IN CH-1 (channel 1) to CH-4 connectors (XLR 3-pin, female)

Use these connectors to connect separate channels of analog audio input from a player VCR or other external audio equipment.

You can switch the audio input level setting with the LEVEL SELECT menu item (see page 64).

cAUDIO OUT CH-1 (channel 1) to CH-4 connectors

(XLR 3-pin, male)

These connectors output channel-1 to channel-4 analog audio signals, respectively.

It is possible to use the AUDIO OUT CH-3 and AUDIO OUT CH-4 connectors for audio monitor output for channels 1 and 2, respectively (use the OUTPUT CH3/4 menu item (see page 65)).

dAUDIO MONITOR OUT connector (RCA phono jack)

This connector outputs audio signals for monitoring. The audio signals to be output from this connector can be selected with the MONITOR SELECT switches on the menu control panel.

DExternal device connectors

VIDEO CONTROL

aVIDEO CONTROL connector

REMOTE

bREMOTE connector

aVIDEO CONTROL connector (D-sub 15-pin)

For remote control of the internal digital video processor, connect an optional remote control unit such as the UVR- 60/60P or BVR-50/50P to this connector.

bREMOTE connector (D-sub 9-pin)

When controlling this unit from an editing control unit such as the ES-3, ES-7, PVE-500, BVE-600/800/910/ 2000, or RM-450/450CE, connect the unit to the editing control unit via this connector using the optional 9-pin remote control cable.

20 Location and Function of Parts