Print

Operation Search

Before use

Getting started

Recording

Playback

Playing images on a TV

Saving images with an external device

Using the Wi-Fi function

Customizing your camcorder

Troubleshooting

Maintenance and precautions

Contents list

Top page > Getting started > Charging the battery pack > Charging the battery pack using your computer

Charging the battery pack using your computer

1.Turn off your camcorder and connect the camcorder to a running computer using the Built-in USB

Cable ().

: To the wall outlet (wall socket)

The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect Built-in USB Cable from your computer.

To charge the battery using an AC-UD10 USB charger/AC Adaptor (sold separately)

You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CP-AH2R, CP-AL, or AC- UP100 portable power supply device (sold separately) to charge the camcorder.

Charging time

Approximate time (min.) required to fully charge a fully discharged battery pack.

Battery pack

Built-in USB Cable* (when using your computer)

NP-FV50 (supplied)

280

 

 

NP-FV70

545

 

 

NP-FV100

1,000

 

 

The charging times shown in the table above are measured when charging the camcorder at a room temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F).

* The charging times are measured without using the USB Connection support cable.

To remove the battery pack

Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery pack ().

45

Page 45
Image 45
Sony PJ790 manual Charging the battery pack using your computer, Battery pack Built-in USB Cable* when using your computer