Notes
The recording date and time are recorded automatically on the recording media. They are not displayed during recording. However, you can check them as [Data Code] during playback. To
display them, select | [Setup] | [ Playback Settings] | [Data Code] |
[Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area ADJ] set to [On]. The clock may not automatically adjust to the correct time, depending on the country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to [Off] (models with GPS).
Related topics
Information on your camcorder model: Model Information
To set the date and time again: [Date & Time Setting]
To calibrate the touch panel: [Calibration]
Back to top
Copyright 2013 Sony Corporation
49
