Menu Function 9 Chapter
HOME2 page
Up to six function keys can be defined (i.e. six functions can be assigned to the F1 to F6 buttons in the HOME2 page).
You can select and define the following function keys:
•Functions selected from the function menu items in the HOME page and menu pages 1 to 4
•Function key to display the setting for setup menu item 211 (REMOTE1 PORT) and to carry out the operation when the menu item setting is “panel”.
Note
By factory default, no function keys are defined in the HOME2 page.
It is not possible to display the HOME2 page unless you have defined at least one function key in that page.
For details of defining
Page 6
You can define up to six setup menu items (assign six setup menu items to the F1 to F6 buttons) and register them on page 6.
Note
There is nothing defined on page 6 when the unit is shipped from the factory.
For more information about defining setup menu items for page 6, refer to the Maintenance Manual Volume 1.
To change a menu item setting
To change a menu item setting, press the corresponding function button (F1 to F6) to display the desired setting in the lower part of the menu display. Each press of the button displays the next setting.
When a menu item setting flashes
Menu item settings flash to inform you that you can change the setting value by rotating the MULTI CONTROL knob.
To change the function menu page
Press either of the page buttons (V, v).
•The V button selects the next page in the order HOMEt1t2t3t4t5t6tHOME...
•The v button selects the next page in the order HOMEt6t5t4t3t2t1tHOME...
Settings which do not appear in the menu display section
In the HOME page (see the figure in Section