Editing 5 Chapter
Notes
•In preread editing, if an input video signal is used as the reference signal for the output video signal, this forms a feedback loop. To prevent the occurrence of feedback, set the F2 (OUTREF)(see page
•When the preread mode is selected, to prevent feedback due to the loop connection, whatever the editing mode of this unit, no
When the PREREAD is set to OFF after preread editing, however, if the loop connection remains and an
To prevent this, select PB mode for the video and digital audio channels in all the modes before the preread editing, as follows.
1Set F2 (PB/EE) in function menu HOME page to PB.
2Set the F6 (PREREAD)(see page
3Make the necessary connections for the preread editing.
4After selecting the desired insert editing mode, carry out the preread editing.
5When the preread editing is completed, remove the connections.
6Set the PREREAD to OFF.
7Check that no loop connection remains.