Chapter10 SetupMenus
| Menu items in the range 500 to 599, relating to tape protection | ||||
|
|
|
|
|
|
Item number | Item name | Settings | |||
|
|
|
|
|
|
501 | STILL TIMER | Select the time delay from the tape transport stopping (either the “stop mode” or | |||
|
|
| the still playback mode in search mode) until the unit automatically switches to | ||
|
|
| the tape protection mode, in order to protect the video heads and the tape. | ||
|
|
| 0.5S to [8M] to 30M: Set the value in the range 0.5 seconds to 30 minutes. | ||
|
|
|
|
|
|
502 | TAPE PROTECTION | Select the operation of the protection mode to protect the video heads and tape | |||
| MODE FROM SEARCH | when in the still playback mode in search mode (jog/shuttle). | |||
|
|
| [STEP]: Step forward at 1/30 normal speed every 2 seconds. | ||
|
|
| STDBY: Switch to “Standby OFF mode” (the unit not on standby). | ||
|
|
| T.REL: Switch to tension release mode (the tape tension slackened). | ||
503 | TAPE PROTECTION | Select the operation of the protection mode to protect the video heads and tape | |||
| MODE FROM STOP | when stopped (the “stop mode”). | |||
|
|
| [STDBY]: Switch to “Standby OFF mode” (the unit not on standby). | ||
|
|
| T.REL: Switch to tension release mode (the tape tension slackened). | ||
|
|
| STEP: Step forward at 1/30 normal speed every 2 seconds. | ||
504 | DRUM ROTATION IN | Select whether the drum rotates in “Standby OFF mode”. | |||
| STANDBY OFF | [OFF]: Drum does not rotate. | |||
|
|
| ON: Drum rotates. | ||
505 | STILL TENSION | Select the tape tension state in the still playback mode. | |||
|
|
| [NORML]: Normal tape tension is maintained during still playback mode, ready for | ||
|
|
| playback. | ||
|
|
| LOOSE: Reduce the tape tension further from the NORML setting. (Select | ||
|
|
| “LOOSE” when the unit is on standby for a long period of still playback, for | ||
|
|
| example, in a library management system (LMS).) | ||
|
|
|
|
|
|
|
|
| Note | ||
|
|
| When LOOSE is selected and the tape tension is reduced, playback cannot be | ||
|
|
| guaranteed. | ||
|
|
|
|
|
|
| Menu items in the range 600 to 650, relating to the time code generator | ||||
|
|
|
|
|
|
Item number | Item name | Settings | |||
|
|
|
|
| |
601 | VITC POSITION | In 59.94i, 29.97PsF mode | |||
| (Invalid in 24PsF or | Select a line to insert the VITC in. (For SD output) | |||
| 23.98PsF mode) | 12H to [16H] to 20H: Select any line from 12 to 20. | |||
|
|
|
|
| |
|
|
| Note | ||
|
|
| You can insert the VITC signal in two places. To insert it in two places, set both | ||
|
|
| items 601 and 602. | ||
|
|
|
| ||
|
|
| In 50i, 25PsF mode | ||
|
|
| Select a line to insert the VITC in. (For SD output) | ||
|
|
| 9H to [19H] to 22H: Select any line from 9 to 22. | ||
|
|
|
|
| |
|
|
| Note | ||
|
|
| You can insert the VITC signal in two places. To insert it in two places, set both | ||
|
|
| items 601 and 602. | ||
|
|
|
|
| (Continued) |