5-3 Special Automatic Editing Methods
Editing 5 Chapter
This section describes the following automatic editing methods:
•Quick editing
•Continuous editing
•Standalone editing
•Manual editing
•Preread editing
After selecting the edit mode, you can save on editing time by setting the edit points and executing the edit at the same time.
For quick editing, use the following procedure.
Z
2 3 | 1 |
1When operating the player, press the PLAYER button, turning it on, and when operating the recorder, press the RECORDER button, turning it on, then stop the tapes on both the player and the recorder at the positions you wish to make the respective IN points.
2Press the AUTO EDIT button. Editing starts.
3Watching the editing on the monitor, at the position you wish to make the OUT point, hold down the ENTRY button and press the OUT button.
Editing ends.
The point at which you started the editing becomes the IN point, and the point at which you ended the editing becomes the OUT point.
If you want to preview
In step 1, after setting the recorder or player IN point, press the PREVIEW button.
After an automatic editing operation, the recorder automatically returns to the OUT point. For the second and subsequent editing operations, you can continue editing by simply specifying the IN and OUT points on the player. In this case the current OUT point on the recorder becomes the new IN point.
|
|
|
|
| OUT point of preceding edit = | ||
|
|
|
|
| |||
Recorder |
|
|
| IN point of current edit | |||
|
|
|
|
|
| ||
|
|
|
|
| |||
|
|
|
| ||||
Preceding edit segment |
| Current edit segment |
| ||||
Player |
|
|
|
|
| ||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
|
| |
|
|
|
|
| |||
| IN point |
|
| OUT point | |||
|
|
|
|
|
|
|
|
After automatic editing of one edit segment, to carry out continuous editing use the following procedure.
1Set the player IN and OUT points.
On the recorder the OUT point for the previous edit becomes the new IN point.
2Press the PREVIEW button to carry out a preview.
3Press the AUTO EDIT button.
This executes the edit.
When the editing operation is completed, the recorder stops at the OUT point, and the player stops 2 seconds after the OUT point.
By repeating this process, you can carry out continuous editing.
By setting setup menu item 326, you can make the preceding OUT point automatically become the new IN point.