Monitor display
Title
The title (maximum 14 characters) set in attribute data display/modify mode.
Selected clip number
A
Remaining memory percentage
The percentage of remaining memory (user area) available for use.
If there is not sufficient free memory, the message <<MEMORY FULL!!>> appears (stays lit for three seconds) in time data display area 2 when you attempt to add data.
Final data recording date
The data (year/month/day) on which data was most recently recorded.
Data type
The data type. The displayed data is the same as the data displayed in the menu display section, but some of the captions are different. There are the following types.
Cue Point: Cue point
WP: Write protected
Mark: Mark
R:Recording start point IN Point: IN point OUT Point: OUT point Tk: Take number Cut: Cut number Scn: Scene number Comment: Comment
Clip data No. 0001...
Data is displayed for 1 clip per line.
Clips are assigned consecutive numbers, beginning with No. 0001 for the clip on the top line.
To select clips
Rotate the MULTI CONTROL knob in clip data display mode.
The data for the selected clip appears in the menu display section, where it is selected.
In the monitor display, the “*” cursor moves up and down as clips are selected.
Data which is not visible is selected and displayed after scrolling.
| 2001/07/21 | No. 0001 | 48% | |
|
| Cue Point | WP Mark | R |
Cursor |
| 00:00:02:10 | ON KEEP | @ |
| ||||
*00:00:31:10 |
|
| ||
|
| 00:00:57:10 |
|
|
|
|
|
| |
To select data in a clip
In clip data display mode, press the F3 (T) or F4 (t) button.
The “*” cursor moves and data is selected. Data which is not visible is selected and displayed after scrolling.
| ||
2001/07/21 | No. 0001 | 48% |
Cue Point | WP Mark | R |
|
| (Scrolling) |
00:00:31:10 |
|
|
00:00:57:10 |
|
|
Cursor
Chapter7
Chapter 7