2 Analog video input/output section

 

3 Digital audio input/output section

REF INPUT

INPUT 1125/525

OFF ON 75Ω

1 REF.VIDEO INPUT connectors and 75Ω termination switch

VIDEO OUTPUT

COMPOSITE COMPONENT

1Y

2R-Y

 

2 COMPONENT VIDEO

3

OUTPUT connectors

(SUPER)

B-Y

3COMPOSITE VIDEO OUTPUT connectors

1REF. (reference) VIDEO INPUT connectors (BNC type) and 75Ω termination switch

Input a reference video signal. Input a three-valued (positive and negative) sync signal, a video signal with chroma burst (VBS) or a monochrome video signal (VS). When using the loop-through connection set the switch to the OFF position, and otherwise to the ON position.

2COMPONENT VIDEO OUTPUT connectors (BNC type)

These connectors output analog component video signals (Y/R–Y/B–Y).

3COMPOSITE VIDEO OUTPUT connectors (BNC type)

These connectors output analog composite video signals.

When the setting of F4 (CHARA) in function menu page 4 is ON, connector 3 (SUPER) outputs a signal with superimposed time code, menu settings, alarm messages, and other text information.

1AUDIO INPUT (AES/EBU) connectors

AUDIO INPUT(AES/EBU)

CH1/2 CH3/4

AUDIO OUTPUT(AES/EBU)

CH1/2 CH3/4

2AUDIO OUTPUT (AES/EBU) connectors

1AUDIO INPUT (AES/EBU) connectors (BNC type)

Input two sets (4 channels: CH1/2 and CH3/4) of AES/ EBU format digital audio signals.

2AUDIO OUTPUT (AES/EBU) connectors (BNC type)

Output a maximum of 4 sets (4 channels: CH1/2, CH3/4) of AES/EBU format digital audio signals.

Parts of Function and Location 2 Chapter

Chapter 2 Location and Function of Parts 2-17