To write in crash recording or assemble editing
1Hold the MARK button down for at least 2 seconds.
2At the position you wish to write the mark, hold down the ENTRY button, and press the MARK button.
A mark of the type selected in item G04 of the shot mark operation menu is written.
Z
ENTRY button
MARK button
REC/ERASE indicator
Writing during playback, while stopped, or during a search
When this unit is in any of the playback, stop, or search modes, you can write a post mark only.
1Hold the MARK button down for at least 2 seconds.
The REC/ERASE indicator lights.
2At the position you wish to write the mark, hold down the ENTRY button and press the MARK button.
A post mark is written the instant you pressed the MARK button.
While the mark is being written, the message “RECORD SHOT MARK” appears on the monitor, and the REC/ERASE indicator flashes.
Erasing a shot mark
Select the shot mark from the shot mark list, and then carry out the deletion operation.
For details of the procedure, see page
Displaying the shot mark list
Hold down the ENTRY button and press the LIST button.
Z
ENTRY button
LIST button
All of the shot mark types for which item G02 in the shot mark operation menu is set to “ON” appear in the list. If you do the same operation again, the list display disappears.
While the shot mark list is displayed, the function menu display changes as follows.
SHT |
|
MRK MEMO SELECT DELETE | SETING EXIT |
6 Chapter
Mark Shot Function
Chapter 6 Shot Mark Function |