Page 3
Item | Setting |
|
|
F1 (SYNC) | Sets the HD output signal sync phase. |
| Setting method |
| With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal |
| sync phase across the range ±15 µs relative to this unit’s input reference signal. |
| Adjust this item when you want to adjust the output signal sync phase precisely to match a reference |
| signal, or when connecting this unit and other VTRs to a device such as a switcher to perform operations |
| such as special effects editing. |
|
|
F2 (SC) | Sets the HD output signal subcarrier phase. |
| Setting method |
| With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal |
| subcarrier phase across the range ±200 ns relative to this unit’s input reference signal. |
| Adjust this item when you are using composite signals in editing and want to adjust the output signal |
| subcarrier phase precisely to match a reference signal. Even when this value is adjusted, the output SCH |
| (subcarrier to sync) phase is maintained. |
|
|
F4 (EMPHSS) | Specifies whether to add audio emphasis to analog audio input signals and Betacam/Betacam SP format |
| playback audio signals. |
| ON: Add audio emphasis. |
| OFF: Do not add audio emphasis. |
|
|
F5 (T INFO) | Selects the type of time data to display in time data display area 2. |
| TOTAL: Display total time. |
| REMAIN: Display remaining time. |
|
|
Menu Function 9 Chapter