Menu items in the range 700 to 799, relating to video control (Continued)
Item number | Item name |
| Settings | ||||
|
|
|
|
|
|
| |
710 | INTERNAL VIDEO | Select the test signal to be output from the VTR’s internal test signal generator. | |||||
| SIGNAL GENERATOR | OFF: No test signal is generated. (The VTR operates normally.) | |||||
|
|
| [CB]: Color bar signal | ||||
|
|
| MLTBS: | ||||
|
|
| 10STP: | ||||
|
|
| PLSBR: Pulse and bar signal | ||||
|
|
| RAMP: Ramp signal | ||||
|
|
| BLACK: Black signal | ||||
|
|
| To turn on the internal test signal generator, hold the F1 (VID.IN) button in | ||||
|
|
| function menu HOME page for three seconds or more with this menu item set to | ||||
|
|
| other than OFF. When the test signal generator is turned on, the display of the | ||||
|
|
| VID.IN setting changes to SG. To turn off the test signal generator, press the F1 | ||||
|
|
| (VID.IN) button in function menu HOME page again. | ||||
|
|
|
| ||||
712 | VIDEO PROCESS ON |
| When the function menu item CAPSTN or setup menu item 106 is set to 2F for 2- | ||||
| CAP LOCK 2FIELD |
| field playback, select whether or not to carry out a “picture shift”. | ||||
| (Invalid in 24PsF or |
| [OFF]: No picture shift | ||||
| 23.98PsF mode) |
| ON: Carry out picture shift. | ||||
|
|
|
|
|
|
|
|
|
|
|
| Note | |||
|
|
|
| To eliminate the adverse effect of the residual chrominance subcarrier component | |||
|
|
|
| in the Y signal that is the result of the Y/C separation, this unit automatically | |||
|
|
|
| applies a shift to the playback image in the H direction, so that even in | |||
|
|
|
| playback a satisfactory image can be obtained. | |||
|
|
|
|
|
| ||
713 | VIDEO SETUP |
| Set the video setup amount to be added to the composite output signal. | ||||
| REFERENCE LEVEL |
|
|
|
|
| |
| (Valid only in 59.94i or |
|
|
|
|
| |
|
| Note |
|
|
| ||
| 29.97PsF mode) |
|
|
|
| ||
|
| The setup amount specified in this menu item has no connection with the setting | |||||
|
|
|
| ||||
|
| ||||||
|
| of F5 (SETUP/BLACK) in function menu page 2. | |||||
|
|
|
|
|
|
|
|
| 0 | MASTER LEVEL | When the Betacam playback signal and output signal settings are “MSTER” | ||||
|
|
| (master), the setup amount specified for this | ||||
|
|
| Betacam playback signal and is added to the output signal. | ||||
|
|
| 0.0% to |
| to 10.0%: Setting in this range, in 0.5% increments. | ||
|
|
| 7.5% | ||||
|
|
|
|
|
|
|
|
| 1 | BETACAM PB | [MSTER]: Set the Betacam playback signal to the master setting. | ||||
|
| LEVEL | 0.0% to 7.5% to 10.0%: Set the setup amount to be removed from the Betacam | ||||
|
|
|
| playback signal in this range, in 0.5% increments. | |||
|
|
|
|
|
|
|
|
| 2 | OUTPUT LEVEL | [MSTER]: Set the output signal to the master setting. | ||||
|
|
| 0.0% to 7.5% to 10.0%: Set the setup amount to be added to the output signal in | ||||
|
|
|
| this range, in 0.5% increments. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (Continued) |
10 Chapter
Menus Setup