Menu items in the range 700 to 799, relating to video control (Continued)
(Items 715 to 720: Settings for controlling the SD video processing system according to the menu settings.)
Item number | Item name |
| Settings | |
|
|
|
|
|
715 | VIDEO GAIN CONTROL |
| Adjust the video output level. | |
|
|
| 0 to [800H] to B50H | |
|
|
|
|
|
|
|
| Note | |
|
|
| This item is valid for both HD and SD outputs. | |
716 | CHROMA GAIN |
| Adjust the chroma output level. | |
| CONTROL |
| 0 to [800H] to B50H | |
|
|
|
|
|
|
|
| Note | |
|
|
| This item is valid for both HD and SD outputs. | |
717 | CHROMA PHASE |
| Adjust the SD chroma phase. | |
| CONTROL |
| 0 to [80H] to FFH | |
|
|
|
|
|
|
|
| Note | |
|
|
| This item is valid for both HD and SD outputs. | |
|
|
|
|
|
718 | SETUP LEVEL (59.94i, |
| Adjust the SD setup level (black level). | |
| 29.97PsF mode)/BLACK |
| 0 to [110H] to 220H | |
| LEVEL (50i, 25PsF mode) |
|
|
|
| (Invalid in 24PsF or |
|
|
|
|
| Note |
| |
| 23.98PsF mode) |
|
| |
|
| This item is valid for both HD and SD outputs when | ||
|
|
| ||
|
|
| menu item 212 (VIDEO REMOTE CONTROL SELECT) is set to “black”. | |
|
|
|
|
|
719 | SYSTEM PHASE SYNC |
| Adjust the SD output signal sync phase. | |
| (Invalid in 24PsF or |
| 0 to [80H] to FFH | |
| 23.98PsF mode) |
|
|
|
|
|
|
|
|
720 | SYSTEM PHASE SC |
| Adjust the SD output signal subcarrier phase. | |
| (Invalid in 24PsF or |
| [0] to 3FFH | |
| 23.98PsF mode) |
|
|
|
|
|
|
|
|
721 | Y/C DELAY | For playback from an analog Betacam cassette, adjust the Y/C delay. | ||
| (Invalid in 24PsF or | 0 to [800H] to FFFH | ||
| 23.98PsF mode) |
|
|
|
|
|
|
|
|
|
|
|
| (Continued) |
Notes
•When you make settings for menu items 715 to 718 or 740 to 747, set the function menu item V.PROC to MENU. When it is set to MENU, all controls for video output processing on the control panel are disabled.
•When menu item 337 is set to SD, changing the settings of menu items 719 and 720 changes the phase of HD output signals as well as that of SD.
After changing the settings, use the F1 (SYNC) and F2 (SC) items or menu items 745 and 746 on function menu page 3 to readjust the phase of HD output signals.
Chapter10 SetupMenus
Chapter 10 Setup Menus