5 Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.
6 Select the first 2 digits by turning the SEL/PUSH EXEC dial, then press the dial.
7 Repeat step 6 to set up the other digits.
8 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
9 Press MENU to hide the menu screen.
To cancel the user bits setting
Select [CANCEL] in step 8.
To reset the user bits
Select [RESET] in step 5.
To set the user bits to the real time clock
Select the (TC/UB SET) menu, [UB TIME REC], then [ON].
bNote
•
•When you input HDV format signal via i.LINK connection, the
Switching the time value
Press
Each time you press the button, the time value changes between the time code and user bits. TC: 00:00:00:00 or 00:00.00:00
bNote
•The time code and user bits cannot be displayed properly if the tape does not have time code and/or user bits recordings or if the time code was recorded using a
•When you input HDV format signal via i.LINK connection, the
104Dubbing/Editing