Dubbing/Editing
Dubbing to another tapeConnecting a VCR
You can copy a picture played back on your camcorder to other recording devices (such as VCRs).
Connect your camcorder to a VCR as shown in the following illustration.
To dub to an HDV compatible device
Connect your camcorder to an HDV compatible device using an i.LINK cable (optional).
Player | Recorder |
HDV/DV jack
Signal flow
i.LINK cable (optional)
HDV/DV jack
To select the video format to be dubbed
The video format to be dubbed depends on the settings of [VCR HDV/DV] and [i.LINK
CONV] on the (IN/OUT REC) menu. Before setting these menu items, disconnect the i.LINK cable.
•Pictures will be dubbed in the recorded format when [VCR HDV/DV] is set to [AUTO], and [HDVtDV CONV] to [OFF] in [i.LINK CONV].
•Only pictures in the selected format will be dubbed when [VCR HDV/DV] is set to [HDV] or [DV]. Other pictures will be dubbed as blank portions, so neither picture nor sound will be dubbed.
bNote
•If you change the settings of [VCR HDV/DV] and [i.LINK CONV] with the i.LINK cable connected, the video device may not be able to recognize the
video signal from the camcorder at the time of dubbing.
•When [VCR HDV/DV] is set to [AUTO] and the signal switches between HDV and DV, the picture and sound disappear temporarily.
•When the recorder is an
HDV/DV] on the (IN/OUT REC) menu to [AUTO] on the recording
90Dubbing/Editing