To cancel the operation

Press STORE/CHECK/EXEC repeatedly until the STORE/CHECK/EXEC lamps are all turned off.

Revising a specific color –Color Correction

You can select and revise up to 2 specific colors (2 palettes) of objects, such as leaves and sky, that will be recorded in your favorite color tone.

1 During recording or in the standby mode, press MENU.

2 Select the (CAMERA SET) menu by turning the SEL/PUSH EXEC dial, then press the dial.

3 Select [COLOR CORRCT] by turning the SEL/PUSH EXEC dial, then press the dial.

4 Select [TYPE] by turning the SEL/ PUSH EXEC dial, then press the dial.

5 Select a revision type by turning the SEL/PUSH EXEC dial, then press the dial.

[OFF]

Normal recording.

[COLOR REVISN]

Revises the color that has been set in the memory.

You cannot revise the color that is not included in the memory (the part is displayed in black and white as set in [COLOR EXTRCT]).

[COLOR EXTRCT]

Recording

Displays only the parts set in the memory in

 

color, and displays other parts in black and

 

white.

 

You can use this not only as an effect, but

 

also for checking a color when you set the

 

memory.

 

appears.

 

6 Select [MEMORY SEL] by turning the SEL/PUSH EXEC dial, then press the dial.

[1](the default setting)

Only memory 1 is effective.

[2]

Only memory 2 is effective.

[1&2]

Both memories 1 and 2 are effective.

7 Select [MEM1 COLOR] or [MEM2 COLOR] by turning the SEL/PUSH EXEC dial, then press the dial.

8 Adjust [PHASE], [RANGE], and [SATURATION] while referring to “To specify a color” (p. 44).

9 Select [MEM1 REVISN] or [MEM2 REVISN] by turning the SEL/PUSH EXEC dial, then press the dial.

,continued

Recording 43