* With the LCD BACKLIGHT switch set to ON.

bNote

•Figures are those of 60 Hz. They may be slightly longer at 50 Hz.

•The recording and playback time will be shorter when you use your camcorder in low temperature.

•The battery life will be slightly shorter when you use both of the LCD panel and the viewfinder than when you use only the LCD panel.

•The battery information will not be correctly displayed when the battery pack is discharged.

Using an outside power source

You can use the AC Adaptor/charger as the power source when you do not want the battery to run out.

PRECAUTION

Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall socket via the AC Adaptor/charger.

To the wall socket

Power cord

AC Adaptor/ charger

Mode switch

Connecting cord (DK-415)

1 Set the mode switch to VCR/

CAMERA.

No power will be supplied if the mode switch is set to CHARGE.

2 Attach the connecting cord (DK-415) to the camcorder.

Press the attaching part of the connecting cord (DK-415), and slide it down.

3 Connect the connecting cord (DK-415) to the AC Adaptor/charger.

4 Connect the mains lead to the AC Adaptor/charger.

5 Connect the mains lead to the wall socket.

14Getting started