If [ND1] flashes
Set the ND FILTER switch to 1 to turn on [ND1].
If [ND2] flashes
Set the ND FILTER switch to 2 to turn on [ND2].
If [ND OFF] flashes
Set the ND FILTER switch to OFF to turn off the indicator.
bNote
•If you move the ND FILTER switch during recording, the picture and sound may be distorted.
•If you adjust the iris manually, no ND filter indicator will appear even if the ND filter should be activated.
zTip
•If you close the iris extensively when recording a bright subject, diffraction may occur, resulting in a fuzzy focus. (This is a common phenomenon with video cameras.) The ND filter suppresses this phenomenon and gives better recording results.
If there is a part of the screen where brightness is over a certain level, the part may appear excessively white when played back. By displaying the zebra pattern on such a part, you can be reminded to adjust the brightness before recording.
Select the brightness level to display the zebra pattern in the menu setting.
1 During recording or in the standby mode, press MENU.
2 Select the (CAMERA SET) menu by turning the SEL/PUSH EXEC dial, then press the dial.
3 Select [ZEBRA LEVEL] by turning the SEL/PUSH EXEC dial, then press the dial.
32Recording