To connect the cable of the microphone or audio device
Align the pins of the plug to the INPUT1 or INPUT2 connectors, and connect them securely.
XLR connector (male)
Selecting the recording channel
The following settings are required to record the audio source connected to the INPUT1 or INPUT2 connector.
1 In the standby mode, press MENU.
2 Select the (AUDIO SET) menu by turning the SEL/PUSH EXEC dial, then press the dial.
3 Select [MIC SELECT] by turning the SEL/PUSH EXEC dial, then press the dial.
4 Select [XLR] by turning the SEL/ PUSH EXEC dial, then press the dial.
5 Select [XLR SET] by turning the SEL/ PUSH EXEC dial, then press the dial.
6 Select [XLR CH SET] by turning the SEL/PUSH EXEC dial, then press the dial.
7 Select a channel by turning the SEL/ PUSH EXEC dial, then press the dial.
| Connector | XLR CH | Recorded |
|
| SET | channel |
|
|
|
|
| INPUT1 | CH1 | Channel 1 |
|
|
|
|
|
| CH1, CH2 | Channel 1 |
|
|
| Channel 2 |
|
|
|
|
| INPUT2 | CH1 | Channel 2 |
|
|
|
|
|
| CH1, CH2 | None |
|
|
|
|
|
|
|
|
8 Set [INPUT1 LEVEL] or [INPUT2 LEVEL], and the PHANTOM switch for each connector.
Source | Con- | Menu | PHAN- |
| nector |
| TOM |
|
|
| switch |
|
|
|
|
Micro- | INPUT1 | [INPUT1 | ON |
phone |
| LEVEL] – |
|
|
| [MIC] |
|
|
|
|
|
| INPUT2 | [INPUT2 | ON |
|
| LEVEL] – |
|
|
| [MIC] |
|
|
|
|
|
40Recording