Playback
Viewing moviesMake sure you have a recorded cassette inserted into your camcorder.
Some of the operations are possible using the Remote Commander.
When you want to play back recordings on your TV, see page 53.
When playing back the tape, select the (IN/OUT REC) menu, [VCR HDV/DV], then [AUTO] (the default setting).
POWER switch
1 Open the LCD panel and adjust the angle.
2 While pressing the green button, set the POWER switch to VCR.
3 Press m (rewind) to go to the point you want to view.
4 Press N (play) to start playback.
To adjust the volumeAdjust the volume by pressing VOLUME
– (decrease) / + (increase).
To stop playbackPress x (stop).
To pausePress X (pause) during playback. |
|
| |
Press N (play) or X (pause) again to restart the | Playback |
mode continues for more than 3 minutes. | |
playback. |
|
Playback stops automatically when the pause |
|
To fast forward or rewind |
|
Press M (fast forward) or m (rewind) in stop |
|
mode. |
|
To review movies on the viewfinder |
|
Close the LCD panel. Then, adjust the |
|
viewfinder angle. |
|
Indicators displayed during tape |
|
playback |
|
|
|
|
|
60min |
| 00:00:00:00 | |
HDV1080i |
|
| 60min |
|
|
|
|
AFormat of the playback signal (HDV1080i/ DVCAM/DV SP)
BRemaining battery
C50i/60i system indicator (p. 83)
DTape transport indicator
ETime code or user bits
FRecording capacity of the tape
Playback 49