REC
START/STOP
Step 1: Store the settings1Press STORE/CHECK/EXEC repeatedly to turn on the STORE lamp.
2Adjust the desired items manually.
To adjust the camera setup items such as iris manually, set the AUTO LOCK switch to the center position to release the auto lock mode. See pages 27 to 31 for details on adjustment.
3Press a button (A or B) to select the storage location.
The setting is stored in the selected button. The settings are called Shot A and Shot B respectively.
bNote
•If you set the POWER switch to OFF, the settings stored in Shot A and B are deleted.
Step 2: Check the stored settings (Shot)
1Press STORE/CHECK/EXEC repeatedly to turn on the CHECK lamp.
2Press the button (A or B) in which the setting was stored.
The selected setting will take effect on the picture on the screen. The focus, zoom, and so on, are automatically adjusted as stored in the setting.
bNote
•You cannot check the transition time, curve set, and
start timer using [SHOT TRANS] on the (CAMERA SET) menu.
1Press STORE/CHECK/EXEC repeatedly to turn on the EXEC lamp.
2Press REC START/STOP.
3Press the button (A or B) in which the desired setting was stored.
Pictures will be recorded with the settings that were changed automatically from the current ones to the stored ones.
120min REC 00:00:05:00
SHOT TRANSEXEC
SHOT A
SHOT B
S |
|
|
| E | |
|
| ||||
|
|
| 3sec | ||
|
|
|
|
|
|
Transition bar | Countdown | ||||
S: start | display* | ||||
E: end |
|
|
|
|
|
*Appears when the start timer is activated.
bNote
•You cannot zoom, focus, or adjust manually while checking or activating the Shot transition.
•When you change [SHOT TRANS] on the (CAMERA SET) menu, turn off the STORE/ CHECK/EXEC lamp by pressing the button.
•You cannot return from the stored Shot A or B settings to previous settings after you activate the Shot transition during recording.
•If you press the following buttons during the shot transition operation, the operation is canceled:
–PICTURE PROFILE
–MENU
–
–EXPANDED FOCUS
–STATUS CHECK
zTip
•You can record using both settings by making them change either from Shot A to Shot B or from Shot B to Shot A. For example, to change from Shot A to Shot B, turn on the CHECK lamp and press A followed by REC START/STOP, then turn on the EXEC lamp and press B.
•You can rehearse the shot transition by pressing the button (A or B), in which the desired setting was stored, before pressing REC START/STOP in step 2.
42Recording