Remote Commander

2 Insert 2 R6 (size AA) batteries by matching the + and – on the batteries to the + and – in the battery compartment.

ATC RESET button (p. 103)

BDISPLAY button (p. 51)

CSEARCH MODE button (p. 56)

D./> buttons (p. 56)

EVideo control buttons (Rewind, Playback, Fast-forward, Pause, Stop, Frame, Slow, ×2) (p. 49)

FTransmitter

After turning on your camcorder, point towards the remote sensor to control your camcorder.

GREC START/STOP button (p. 21)

HDATA CODE button (p. 52)

IPower zoom button (p. 23)

To insert the batteries

1Press and pull out the cover of the battery compartment.

3Replace the cover back until it clicks.

bNotes on the Remote Commander

•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.

•The Remote Commander may not function properly when the remote sensor is obstructed with a conversion lens (optional).

•When you are operating with the Remote Commander supplied with your camcorder, your VCR may also operate. In that case, select a commander mode other than VTR 2 for your VCR, or cover the sensor of your VCR with black paper.

132Quick Reference