SHOT TRANS
Select this setting to set the transition duration, time, and start timer. See page 41 for details on using the shot transition function.
bNote
•Before setting [SHOT TRANS], turn off all of the STORE/CHECK/EXEC lamps by pressing the button repeatedly (p. 41).
TRANS TIME
Select the time that takes to make a transition from the current setting to the selected setting.
Duration from [2.0 sec] through [15.0 sec] are available. It is set to [4.0 sec] in the default setting.
TRANS CURVE
Select the transition curve.
The figures below show the transition curve of each mode. *1: parameter level
*2: transition of time
LINEAR | Select to make the transition linearly. |
*1
*2
GSOFT STOP Select to make the transition slowly at the end.
*1
*2
SOFT TRANS Select to make the transition slowly at the
beginning and end, and linearly in between. | *1 |
|
*2
START TIMER
GOFF | Select to start the shot transition immediately. |
|
|
5 sec | Select to start the shot transition after 5 seconds. |
|
|
10 sec | Select to start the shot transition after 10 seconds. |
|
|
20 sec | Select to start the shot transition after 20 seconds. |
|
|
60Using the Menu