INT MIC SET
You can set the wind noise reduction and the sensitivity for the external microphone.
INT MIC SENS
GNORMAL | The standard setting. |
|
|
HIGH | Use this setting to record a quiet sound. When a loud sound is recorded |
| with this setting, the sound may be distorted. Make a trial recording in |
| advance. |
|
|
INT MIC WIND
GOFF | Select when you want to record the sound as it is without reducing the |
| noise caused by wind. |
|
|
AUTO | Select to reduce the noise caused by wind. |
|
|
XLR SET
XLR CH SEL
You can select the input signal from an external microphone, and the channel to be recorded.
GCH1 | Select to record the input signal from the INPUT1 connector to |
| channel 1, and that from the INPUT2 connector to channel 2. |
|
|
CH1, CH2 | Select to record the input signal from the INPUT1 connector to |
| channels 1 and 2. |
|
|
XLR AGC LINK
You can select whether the AGC (Auto Gain Control) of channel 1 is linked with or separated from channel 2 when using an external microphone.
GSEPARATE | Select to record the sound in channel 1 separately from that in channel |
| 2 (AGC separated). |
|
|
LINKED | Select to record the sound in channel 1 and that in channel 2 as a set, |
| like stereo sound (AGC linked). appears on the status check display. |
|
|
bNote
•The [LINKED] setting is valid only when the AUDIO SELECT switches of both channels are set to AUTO, and the same item is selected for [INPUT1 LEVEL] and [INPUT2 LEVEL].
,continued
Menu the Using
Using the Menu 67