Using the (CAMERA SET) menu

– STDYSHOT TYP/FRAME REC, etc.

You can select the items listed below on the CAMERA SET menu. For details on how to select items, see “Selecting menu items” (p. 58).

The default settings are marked with G. The indicators in parentheses appear when the

setting is selected. The settings you can adjust vary depending on the power mode of your camcorder. The screen shows the items you can operate at the moment. Unavailable items will be grayed out.

CAMERA SET

STBY

RETURN

WB PRESET OUTDOOR

WB OUTDR LVL

GA I N SETUP

SHOT TRANS

COLOR CORRCT

STEADYSHOT

STDYSHOT TYP

[ MENU ] : END

WB PRESET

Select to use the preset white balance. See page 28 for details.

WB OUTDR LVL

When [OUTDOOR] is selected for the preset white balance, you can select the white balance value for outdoor recording by turning the SEL/PUSH EXEC dial. Levels from –7 (bluish) through +7 (reddish) are available. It is set to 0 (standard) in the default setting.

GAIN SETUP

Select the adjustment value for each position (H, M, and L) of the GAIN switch (p. 30).

1Select [H], [M], or [L] by turning the SEL/PUSH EXEC dial, then press the dial.

2Select an adjustment value by turning the SEL/PUSH EXEC dial, then press the dial.

0dB, 3dB, 6dB, 9dB, 12dB, 15dB, and 18dB are available. The larger the number, the greater the gain.

3Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.

4Press MENU to hide the menu screen.

Menu the Using

,continued

Using the Menu 59