Sony DCR-IP210, IP220 Notes, When executing each item, If the items are not available, Press FN to display the following buttons:

Using a “Memory Stick” – Introduction

To return to FN

Press EXIT.

To execute settings

Press EXEC or OK.

To cancel settings

Press OFF or AUTO. The display returns to PAGE1, 2 or 3.

Notes

•When using the touch panel, press the LCD screen lightly with your finger or the supplied stylus (DCR-IP220 only).

•Do not press the LCD screen with sharp objects other than the stylus supplied (DCR- IP220 only).

•Do not press the LCD screen too hard.

•Do not touch the LCD screen with wet hands.

•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You can control the display with DISPLAY/TOUCH PANEL on your camcorder.

•When operation buttons do not work even if you press them, an adjustment is required (CALIBRATION) (p. 204).

•When the LCD screen gets dirty, use the supplied cleaning cloth.

When executing each item

The green bar appears above the item.

If the items are not available

The color of the items changes to gray.

Press FN to display the following buttons:

In the memory camera mode

PAGE1	SPOT FOCUS, MENU, PLAY, INDEX, SPOT METER, EXPOSURE
PAGE2	SELFTIMER, PLAY, INDEX, MEM MIX
PAGE3	LCD BRT, PLAY, INDEX, VOL
In the memory playback mode
PAGE1	MENU, CAM, INDEX, DELETE, + , –
PAGE2	PB ZOOM, CAM, INDEX, DATA CODE, + , –
PAGE3	LCD BRT, CAM, INDEX, VOL, + , –

104