Maintenance information and precautions

PrecautionsCamcorder operation

•Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor). •For DC or AC operation, use the accessories recommended in this operating

instructions.

•If any solid object or liquid get inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further.

•Avoid rough handling or mechanical shock. Be particularly careful of the lens. •Keep the POWER switch set to (CHG) OFF when you are not using your camcorder. •Do not wrap your camcorder with a towel, for example, and operate it. Doing so

might cause heat to build up inside.

•Keep your camcorder away from strong magnetic fields or mechanical vibration. •Do not touch the LCD screen with a sharp object other than the stylus supplied (DCR-

IP220 only).

•If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction.

•While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction.

•Do not use the network function in a medical institution or in an aircraft (DCR-IP220 only).

On handling tapes

•Do not insert anything into the small holes on the rear of the cassette. These holes are used to sense the type and thickness of the tape and if the recording tab is in or out.

•Do not open the tape protect cover or touch the tape.

•Avoid touching or damaging the terminals. To remove dust, clean the terminals with a soft cloth.

Camcorder care

•Remove the tape, and periodically turn on the power, operate the CAMERA and VCR sections and play back a tape for about three minutes when your camcorder is not to be used for a long time.

•Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens, remove them with a soft cloth.

•Clean your camcorder body with a dry soft cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent which may damage the finish.

•Do not let sand get into your camcorder. When you use your camcorder on a sandy beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause your camcorder to malfunction, and sometimes this malfunction cannot be repaired.

Information Additional

205