Sony DCR-IP210, IP220 To return to FN, To enter a space, Making your own titles, To erase the character, To change a title you have stored, To superimpose your own title on tape

Making your own titles

To return to FN

Press EXIT.

To change a title you have stored

In step 5, select CUSTOM1 SET or CUSTOM2 SET depending on which title you want to change, then press EXEC and enter the new title as desired.

To superimpose your own title on tape

Follow the procedure in “Superimposing a title on starting a recording” on page 88.

If you take five minutes or longer to enter characters in the standby mode while a cassette is in your camcorder

The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to (CHG) OFF and start again from step 1 to complete your title.

We recommend setting the POWER switch to VCR (p. 96) or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters.

To erase the character

Press T. The last character is erased.

To enter a space

Press t.

To enter the character on the same button in succession

Press t to move the cursor to the next position, and enter the character.

Editing

95