Sony DCR-IP210, IP220 (1), (2), (3), (4), (5), Note, To return to FN, To return to FN, To enter a space, To cancel deleting, Note on the ID number, To erase the character

The micro Cassette Memory

To return to FN

Press EXIT.

To erase the label you have made

Select C in step 4. The last character is erased.

To change the label you have made

Insert the cassette to change the label, and operate in the same way to make a new label.

If you take five minutes or longer to enter characters in the standby mode while a cassette is in your camcorder

The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to (CHG) OFF once and then to CAMERA again. After that, repeat the procedure from step 3. The power does not go off if you enter characters in VCR mode.

If you set the write-protect tab of the tape to lock

You cannot label the tape. Slide the write-protect tab to release the write protection.

To erase the character

Press T. The last character is erased.

To enter a space

Press t.

To enter the character on the same button in succession

Press t to move the cursor to the next position, and enter the character.

Erasing all the data in micro Cassette Memory

You can delete all the data in micro Cassette Memory at once.

(1) Set the POWER switch to CAMERA or VCR.

(2) Press FN to display PAGE1.

(3) Press MENU, then select ERASE ALL in in the menu settings, then press EXEC (p. 183).

(4) Press r/R to select OK, then press EXEC. “OK” changes to “EXECUTE.”

(5) Press r/R to select EXECUTE, then press EXEC. “ERASING” flashes on the LCD screen. Once deleting is completed, “COMPLETE” is displayed.

To return to FN

Press EXIT.

To cancel deleting

Select RETURN in step 4 or 5, then press EXEC.

Note

Once you delete all the data in the micro Cassette Memory, the following operations do not work:

–MULTI-PICTURE SEARCH

–TITLE SEARCH

–DATE SEARCH

Note on the ID number

This item cannot be deleted.

Editing

99