Sony DCR-IP210, IP220 (2), Note, When fading out [b], (1) When fading in [a], Using the fader function, Note on the BOUNCE function, To cancel the fader function

Using the fader function(1) When fading in [a]

In the recording standby mode, press FADER until the desired fader indicator flashes.

When fading out [b]

In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows:

FADER t M. FADER t BOUNCE t MONOTONE t (no indicator)

The last selected fader is indicated first of all.

(2) Press START/STOP. The fader indicator stops flashing, then lights up. After the fade in/out is carried out, the fader indicator goes off and your camcorder automatically returns to the normal mode.

1	START/STOP
FADER	FADER

To cancel the fader function

Before pressing START/STOP, press FADER until the indicator disappears.

Note

You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions:

–Super NightShot

–Color Slow Shutter

–Recording still images

–Digital effect

–Memory overlap of MEMORY MIX

While using the BOUNCE function, you cannot use the following functions:

–Zoom

–Picture effect

–PROGRAM AE

–Exposure

–Flexible Spot Meter

–Focus

Note on the BOUNCE function

You cannot select the BOUNCE function in the following mode or functions:

–D ZOOM is activated in the menu settings.

–Wide mode

–Picture effect

–PROGRAM AE

When the POWER switch is set to MEMORY

You cannot use the fader function.

Operations Recording Advanced

57