Preventing accidental erasure

– Image protection

To prevent accidental erasure of important images, you can protect selected images.

Before operation

Insert a “Memory Stick” into your camcorder.

(1) Set the POWER switch to MEMORY or VCR.

(2) In VCR mode, press PB.

In MEMORY mode, go to step 3. (3) Press INDEX to display the index.

(4) Press - MARK. The screen to protect the image appears.

(5) Press the image you want to protect. The “-” appears above the protected image.

3

INDEX

4,5

-MARK

To return to FN

Press EXIT.

-MARK MARK DEL EXIT

123

456

T

1 / 40

t

RET

 

-MARK

 

EXIT

 

1

- 2

 

3

 

 

 

 

 

 

 

 

 

 

 

 

4

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 / 40

 

 

 

T

 

 

 

t

 

 

 

 

 

 

 

 

 

 

To cancel image protection

Press the image you want to cancel image protection in step 5 again. The “-” disappears.

Note

Formatting erases all information on the “Memory Stick,” including the protected image data. Check the contents of the “Memory Stick” before formatting.

If the write-protect tab on the “Memory Stick” is set to LOCK

You cannot carry out image protection.

146