Sony DCR-IP210, IP220 Selecting the size of still image, Using a “Memory Stick” – Introduction

Using a “Memory Stick” – Introduction

Selecting the size of still image

You can select either of two still image sizes.

1600 ⋅ 1200 or 640 ⋅ 480. (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 ⋅ 480.)

The default setting is 1600 ⋅ 1200.

(1) Set the POWER switch to MEMORY.

(2) Press FN to display PAGE1.

(3) Press MENU, then select STILL SET (still image) in in the menu setting, then press EXEC (p. 181).

(4) Press r/R to select IMAGESIZE, then press EXEC.

(5) Press r/R to select the desired image size, then press EXEC. The indicator changes as follows:

1600640

2

FN

1

MEMORY/NETWORK VCR CAMERA

POWER

MODE ON OFF(CHG)

Operations Stick” “Memory

3-5

MENU

MEMORY SET			EXIT
STILL SET		OFF
	BURST
	QUALITY
	IMAGESIZE
		EXEC	RET.

MEMORY SET STILL SET BURST

QUALITY IMAGESIZE

			MEMORY SET
640		EXIT				EXIT
			STILL SET
				BURST
	1600 ⋅	1200		QUALITY	640 ⋅	480
				IMAGESIZE
	640 ⋅	480
	REMAIN				REMAIN
		40				40
EXEC		RET.			EXEC	RET.

Note

When still images recorded on your camcorder in 1600 ⋅ 1200 size are played back on other equipment that does not support 1600 ⋅ 1200 size, the full image may not appear.

109