Warning indicators and messages

If indicators and messages appear on the LCD screen, check the following: See the page in parentheses “( )” for more information.

Warning indicators

100–0001

C:21:00

 

 

100-0001Warning indicator as to file Slow flashing:

•The file is corrupted. •The file is unreadable.

•You are trying to carry out MEMORY MIX function on a moving picture (p. 125).

C:21:00 Self-diagnosis display (p. 192)EThe battery is dead or nearly dead

Slow flashing:

•The battery is nearly dead.

Depending on operational, environmental or battery conditions the E indicator may flash, even if there are approximately five to 10 minutes remaining.

%Moisture condensation has occurred*

Fast flashing:

•Eject the cassette, turn off your camcorder, and leave it for about one hour with the cassette compartment open (p. 201).

Warning indicator as to micro Cassette Memory*

Slow flashing:

•Eject the cassette, and insert it again. If even then the indicator flashes, the micro Cassette Memory of the cassette may be faulty.

Fast flashing:

•The micro Cassette Memory of your camcorder may be faulty.

Warning indicator as to “Memory Stick” Slow flashing:

•No “Memory Stick” is inserted.

Fast flashing:

•The image cannot be recorded on “Memory Stick.”

Warning indicator as to “Memory Stick” formatting*

Fast flashing:

•The “Memory Stick” data is corrupted (p. 100).

•“Memory Stick” is not formatted correctly (p. 182).

Warning indicator as to incompatible “Memory Stick”*

Slow flashing:

•An incompatible “Memory Stick” is inserted.

QWarning indicator as to tape

Slow flashing:

•The tape is near the end. •No cassette is inserted.*

•The write-protect tab on the cassette is out (red) (p. 25).*

Fast flashing:

•The tape has run out.*

q Z Warning indicator as to a cleaning cassette (DCR-IP220 only)

Slow flashing:

•A cleaning cassette is inserted in MEMORY/ NETWORK mode (p. 202).

ZYou need to eject the cassette*

Slow flashing:

•The write-protect tab on the cassette is out (red) (p. 25).

Fast flashing:

•Moisture condensation has occurred (p. 201). •The tape has run out.

•The self-diagnosis display function is activated (p. 192).

-The image is protected*

Slow flashing:

•The image is protected (p. 146).

Warning indicator as to the flash Slow flashing:

•During charging.

Fast flashing:

•The self-diagnosis display function is activated (p. 192).*

•There is something wrong with the flash.

Warning indicator as to recording of still image

Slow image:

•The still image cannot be recorded on a “Memory Stick” (p. 47).

* You hear the melody or beep sound.

Troubleshooting

193