Sony DCR-IP210, IP220 (1), (2), (3), (4), (5), Note, To eject a cassette, To prevent accidental erasure

Step 3 Inserting a cassette

(1) Prepare the power source (p. 17).

(2) Slide OPEN/Z EJECT in the direction of the arrow and open the lid. The cassette compartment automatically lifts up and opens.

(3) Push the middle portion of the back of the cassette into the cassette compartment.

Insert the cassette in a straight line deeply with the cassette window facing the cassette lid.

(4) Close the cassette compartment by pushing down the cassette lid halfway. The cassette compartment automatically goes down.

(5) After the cassette compartment goes down completely, close the lid.

Started Getting

2	3 Cassette window 4,5
	OPEN/Z EJECT

Cassette lid

Cassette compartment

To eject a cassette

Follow the procedures above, and take out the cassette after the cassette compartment opens completely in step 2.

Note

Do not press the cassette compartment down. Doing so may cause a malfunction.

To prevent accidental erasure

Slide the write-protect tab on the cassette to expose the red mark.

25