Sony DCR-IP210, IP220 MEM, M I, – MEMORY MIX, Recording a superimposed image to a tape, Superimposing a still image in a “Memory Stick” on an image

Superimposing a still image in a “Memory Stick” on an image– MEMORY MIXRecording a superimposed image to a tape

Before operation

•Insert a tape for recording into your camcorder.

•Insert a “Memory Stick” recorded with still images into your camcorder.

(1) Set the POWER switch to CAMERA.

(2) Press FN and go to PAGE2.

(3) Press MEM MIX. The last image recorded on the “Memory Stick” appears on the right lower part of the LCD screen.

(4) Press –/+ on the right lower corner of the LCD screen to select the still image which you want to superimpose.

–: To see the previous image + : To see the next image

(5) Press a desired mode. The still image is superimposed on the moving picture.

(6) Press –/+ on the left lower corner of the LCD screen to adjust the effect, then

press OK to return to PAGE2.

M. CHROM: Blue chroma key (only blue background portion) to extract a still image and superimpose it on a moving picture

M. LUMI: Brightness level used when extracting a still image and superimposing it on a moving picture

C. CHROM: Blue chroma key (only blue background portion) to extract a moving picture and superimpose it on a still image

M. OVERLAP: No adjustment necessary

The fewer bars there are on the LCD screen, the stronger the effect.

(7) Press EXIT to return to FN.

(8) Press START/STOP to start recording.

3,4

MEMM I X

MEM MIX

OFF MCCAM OVER– OK

LUMI LAP

CAMCM MCCAM	Still image
CHROM CHROM

100–0001

– +

	5		MEM MIX
			OFF			OK
2 FN	–	+	M. LUMI
			–	+	100–0001
					–	+
	6		MEM MIX
			OFF			OK
PAGE2	–	+	M. LUMI		100–0001
			–	+	–	+

126