Sony DCR-IP210, IP220 (1), (2), (3), (4), [a], [b], [c], [d], [e], [f], Date/time, (data code), Various settings, Playing back a tape, Using the touch panel

Playing back a tapeTo display the screen indicators – Display function

Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote Commander. The indicators disappear on the LCD screen.

To make the indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.

Using the data code function

Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (data code).

Follow the steps below to display the data code using the touch panel or the Remote Commander.

Using the touch panel

(1) In the playback mode, press FN and go to PAGE3.

(2) Press DATA CODE.

DATA CODE

OFF		OK
	CAM	DATE
	DATA	DATA

(3) Select CAM DATA or DATE DATA, then press OK.

(4) Press EXIT.

Using the Remote Commander

Press DATA CODE on the Remote Commander in the playback mode. The display changes as follows:

date/time tvarious settings (SteadyShot off, exposure, white balance, gain, shutter speed, aperture value) tno indicator

To not display various settings

Set DATA CODE in to DATE in the menu settings (p. 185).

The display changes as follows when you press DATA CODE on the Remote Commander:

date/time yno indicator

Date/time		Various settings
50min	0:00:23		50min		0:00:23
						[a]
						[b]
			AUTO			[c]
NOV 15 2002			60	AWB		[d]
12:05:56 PM			F1.8	9dB

[e] [f]

[a] SteadyShot off [b] Exposure mode [c] White balance [d] Gain

[e] Shutter speed [f] Aperture value

Basics – Playback

43