This TV can be installed on a wall by using a Wall-
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
• Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
Follow tile simple steps below to remove tile Table-
Top Stand:
1Disconnect all tile cables from tile TV.
2Gently lay the TV, face down, onto a level and
stable surface covered with a thick and soft
cloth. Make sure the Table-Top Stand is
hanging over the edge.
3 Remove the screws as shown in the illustration
for your model and pull the Table-Top Stand
out.
4 Do not remove any other screws from tile TV.
• Be sure to store the removed screws and Table-Top
Stand in a safe place until you are ready to reattach the
Table-Top Stand. Keep the screws away from small
children.
• For bracket installation, refer to the Wall-Mount insert
(supplied in the accesories) and the instruction guide
provided by the Wall-Mount Bracket model for your
TV. Sufl]cient expertise is required in installing this
TV. especially to determine the strength of the wall for
withstanding the TV's weight.
• For product protection and safety reasons, Sony
strongly recommends that you use the Wall-Mount
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Use the following Sony TV's only with the
following WALL-MOUNT BRACKET.
KDL-26M3000 KDL-32M3000
KDL-26ML130 _KDL-32ML130
KDL-37M3000
SU-WLIO0 SU-WL500
• Use with other WALL-MOUNT BRACKET may cause
instability and possibly result in ir_iury.
fModel: KDL-26M3000
KDL-26ML130
KDL-32M3000
KDL-32ML130
Remove 3 designated screws only.
Model: KDL-37M3000
Remove4 designated screws only.
Level surface Table-Top
covered with a Stand
soft cloth Level surface
covered with a Table-Top
soft cloth Stand
12