";_°For a complete list of all
the functions of the
remote control, see page
58.
Activate the remote control to Press repeatedly until the TV
operate the TV indicator lights up.
Turn on offthe TV Press
Tune directly to a channel To tune to analog channels, press andthen
(or wait 3 seconds).
For digital subchannels, press , (_, press
again, and then .
For example, to select subchanne! 2.1, press ,
_, ,andthen press 4
,_ You can also select digital channels
using the digital program guide.
See page 75 for details.
Adjust the _olume Press .....
Mute the volume Press : (press again to unmute)
Alternate back and forth between Press :
two channels The TV alternates between the current channel
and the last channel tuned.
Display the cun'ent channel Press once to display the channel
number (and other information) number, current time, wide mode, and channel
label (if set). Press again to turn
Display olK
swiich the TV's input to the vcR Press repeatediy to cycle ihr0ugh
DVD player, or other connected the video equipment connected to the TV's
equipment video inputs.
Change video and audio options, Press to display the Menu. For details,
customize the TV's setup, set see "Using the Menus" on page 10 i.
parental controls, and more
Switch the TV's input between Press to alternate between sources
sources connected to the TV's connected to the TV's VHF.UHF and CABLE
VHFiUHF and (?ABLE inputs inputs.
Switch the TV's input to a Press : to display a list ofa available
connected iiINK device iiINK devices, and select the desired device
l_'oln the list. See page 96 for details.