The remote control is preset to operate Sony brand video equipment.
Beta, | ED Beta VCRs | 303 |
8 mm VCR | 302 | |
VHS | VCR | 301 |
DVD | player | 751 |
iiINK | 901 | |
If you have video equipment other than Sony brand that you want to control
with the TV's remote control, use the t\_ltowing procedure to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with the remote control.
Turn to the list of"Manufacturer's Codes" on page 6 l, and find the
Press | repeatedly until the DVD/VCR, SAT/CABLE or |
i.LINK indicator | lights up. |
Press | for five seconds until the indicator of the selected |
input flashes. |
|
While the desired indicator is flashing, enter the
Press :_
You must do step 5 within 10 seconds of step 4, or you must redo steps 4 through 5.
To check if the code nmnber works, aim the remote control at the
equipment and pressthat corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.
If more than one code nmnber is listed, try entering them one by one until you come to the correct code for your equipment.
If you enter a new code nmnber, the code number you previously entered at that setting is erased.
In some cases, you may not be able to operate your equipment with the TV's remote control. In such cases, use the equipment's own remote control unit.
Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset.
