_ When you install KDL42XBR950, use one of these optional accessories:

SONY TABLE TOP STAND: SU-P42T2

SONY WALL-MOUNT BRACKET: SU-PW2

SONY FLOATING STAND: SU-PF1

Connect the other end of display interface cable to the media receiver unit's

DISPLAY SIGNAL OUT jacks, and connect the AC power cord (supplied) to the media receiver unit's AC IN jack.

Display interface AC _ower cord

cable (supplied) (supplied)

After making all connections, connect the AC power cords (supplied) to wall outlets.

Be sure to use the supplied AC power cords.

When connecting optional components, do not connect the AC power cords to wall outlets until you have completed making all connections.

Do not tighten the screws too much. It may damage the

screws.

Do not use damaged cables, such as cables whose connectors are deformed.

Handle the display interface cable with care. This unit may fall

and cause injury if accidently knocked or pulled by the

connected cable.

Page 26
Image 26
Sony KDL42XBR950, KDL32XBR950 operating instructions Display interface AC ower cord Cable supplied supplied