Media Receiver Unit
Rear Pane/
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video ( ) or
VHFiUHF () connections.
Connect to your DVD player's or digital
audio (L.R) jacks. Component video provides better picture quality than the S VIDEO (),
the VHFiUHF () or the composite video (i) connections.
Connects to the input jack of your sub woofer.
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
Connect to the optical audio input of a digital audio component that is PCMiDolby Digital compatible.
Used lbr connecting
connection with persona! computers.
RF input that connects to your VHF, EHFT antenna or cable box.
RF input that connects to your cable signal.
Connect to the DISPLAY SIGNAL IN jacks of the display unit by using the supplied display interface cable.
Can accommodate a
digital
compliant with the
See the instruction manual that came with your equipment for details about connecting and using it with the TV.
Use a
Connects to the left and right audio input jacks of your audio or video equipment. You can use these outputs to listen to your TV's audio through your stereo system.
Connect to the composite A V output jacks on your VCR or other video component. A third
composite AV input jack (VIDEO 2) is located on the front panel of the media receiver
unit. These video connections provide better picture quality than the VHF UHF ( ) connections.
*"Dolby", "Pro Logic", and the
