Started Getting
To connect a CONTROL A1ΙΙ compatible component
DMonaural (2P)
For details, see “Using the CONTROL A1ΙΙ control system” on page 44.
To connect the AC power cord
Connect the AC power cord of the deck to a wall outlet.
Note
If you use a timer, connect the AC power cord to the outlet of the timer.
Demonstration modeWhen you turn on the MD deck and there is no MD in the deck, demonstration mode is activated automatically after about ten minutes. To deactivate the demonstration mode, press any button on the deck or on the remote.
zTo turn off the demonstration mode
Press xand CLEAR simultaneously when there is no MD in the deck.
“Demo Off” appears in the display.
To turn on the demonstration mode again, perform the same procedure described above.
“Demo On” appears in the display.
Setting the clock
Once you set the MD deck’s internal clock, the MD deck will automatically record the date and time of all recordings. For USA and Canadian models, date is displayed in the order of month, day, year, and time on a
Note
The display windows below are of USA and Canadian models.
MENU/NO AMS YES
m/M
1While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Clock Set ?” appears, then press AMS.
The month (or day) indication starts flashing.
3Turn AMS (or press ./> repeatedly) to enter the current day, then press AMS.
The month (or day) indication stops flashing, and the day (or month) indication starts flashing.
4Repeat step 3 to enter the month, day, year, hour, and minute.
Complete!!
Changing the clock setting(s)1Do steps 1 and 2 above.
2Press AMS or m/M repeatedly until the setting you want to change flashes.
GB 12 Hooking up the audio components/Setting the clock