Controls of Function and Location
Press to cancel the selection.
KMENU/NO button (19) (27) (30) (39) (52)
Press to display the Edit Menu or Setup Menu.
LAMS control (12) (14) (23) (30) (39)
Turn to locate tracks, set the clock, select the input characters, or select a menu item and a setting value.
MYES button (18) (27) (30) (39)
Press to carry out the selected operation.
NDIGITAL REC LEVEL control (17)
Turn to adjust the digital recording level.
OANALOG REC LEVEL L/R control (18)
Turn to adjust the analog recording level.
POPEN/CLOSE A button (14) (23)
Press to insert or eject the MD.
N button (14) (23)
Press to start play.
X button (14) (23)
Press to pause play or recording. Press again to resume play or recording.
xbutton (15) (23)
Press to stop play or recording, or cancel the selected operation.
zbutton (14) (18) (19)
Press to record to the MD, monitor the input signal, or mark track numbers.
Qm/M buttons (25) (27) (30) (35)
Press to locate a portion within a track, change the contents of a program, or change the input character.
Lights when the deck is playing or recording to an MD in LP2 or LP4 Stereo mode.
SMD disc tray (14) (23)
Insert an MD as illustrated below.
With the arrow pointing toward the deck
With the labeled side up
TREC MODE selector (16)
Use to set the REC MODE to STEREO, MONO, LP2 or LP4.
UINPUT selector (14)
Use to select the input jack (or connector) of the program source to be recorded.
VPHONE LEVEL control (23)
Turn to adjust the volume of the headphones.
WPHONES jack (23)
Connect headphones to this jack.
XTIMER selector (42)
Use to set the timer for recording (REC) or playing (PLAY). Set to OFF to turn off the timer.
Front panel description 5 GB