To erase a character

Press m/M repeatedly until the character to be erased flashes, then press CLEAR.

9Press YES.

The whole name appears in the display, followed by “Complete!!” to indicate that the labeling procedure is completed.

To cancel the operation

Press MENU/NO or x.

Naming a track or an MD using the remote Z

1Press NAME while the deck is in one of the operating modes listed below, depending on what you want to name:

To name

Press while the deck is

Copying a track or disc name

You can copy an existing track or disc name and use it to name another track on the same disc or the disc itself.

1

While the deck is stopped, playing, or paused,

 

press MENU/NO.

 

“Edit Menu” appears in the display.

2

Turn AMS (or press ./> repeatedly) until

 

“Name ?” appears, then press AMS or YES.

3

Turn AMS (or press ./> repeatedly) until “Nm

 

Copy ?” appears, then press AMS or YES.

4

Turn AMS (or press ./> repeatedly) until the

 

track number (when copying the track name) or

 

“Disc” (when copying the disc name) flashes, then

 

press AMS or YES to copy the selected name.

 

When “No Name” appears in the display

 

The selected track or disc has no name.

A track

Playing, paused, recording, or stopped with the track number displayed

5 Turn AMS (or press ./> repeatedly) until the

The MD

Stopped with total number of tracks displayed

track number (when naming a track) or “Disc”

(when naming a disc) flashes, then press AMS or

YES to enter the copied name.

MDs Recorded Editing

A flashing cursor appears in the display.

2Select the character type as follows:

To select

Press

 

 

Uppercase

CHAR repeatedly until “Selected AB”

letters

appears in the display

 

 

Lowercase

CHAR repeatedly until “Selected ab”

letters

appears in the display

 

 

Numbers and

NUM repeatedly until “Selected 12”

symbols1)

appears in the display

1) Only – . , / ? ! ( ) can be selected.

3

Enter a character using letter/number buttons.

 

When you press each button, the cursor shifts to the

 

right. You can also select a character by pressing ./

 

>.

4

Repeat steps 2 and 3 to enter the rest of the name.

 

To change a character

“Complete!!” appears for a few seconds and the name

is copied.

To cancel the operation

Press MENU/NO or x.

zWhen “Overwrite ?” appears in step 5 above

The track or the disc selected in step 5 already has a name. If you wish to replace the name, press AMS or YES again while the indication appears in the display.

Renaming a track or MD Z

1Press NAME while the deck is in one of the operating modes listed below, depending on what you want to rename:

To rename

Press while the deck is

Press m/M repeatedly until the character to be

changed flashes, press CLEAR to erase the character,

A track

Playing, paused, recording, or stopped with the track number displayed

then repeat steps 2 and 3.

The MD

Stopped with total number of tracks displayed

5 Press NAME.

The whole name appears in the display, followed by

“Complete!!” to indicate that the labeling procedure is

completed.

To cancel the operation

Press MENU/NO or x.

A track or disc name appears in the display.

2Press down CLEAR until the selected name is erased completely.

3Do steps 5 to 8 of “Naming a track or an MD using the controls on the deck” on page 35 or steps 2 to 4 of “Naming a track or an MD using the remote” on page 36.

4Press NAME.

The whole name appears in the display, followed by “Complete!!” to indicate that the labeling procedure is completed.

GB 36 Naming a track or MD