3Turn AMS (or press ./> repeatedly) to change the setting, then press AMS.

4To complete the setting, press AMS or m/M repeatedly until the minute indication flashes, then press AMS or YES.

Displaying the current date and time Z

You can display the current date and time any time while the power is on.

Press DATE PRESENT.

Each press of the button changes the display as follows:

Current display

r

Date

r

Time

zFor precise date and time stamping of recordings

Reset the time at least once a week.

Note

If the AC power cord is disconnected for a long time, the memorized clock settings will disappear and “Initialize” will flash in the display the next time you plug in and turn on the deck. If this happens, reset the clock.

Displaying the recorded date Z

You can then check the recorded date and time of a track.

1Press ./> or number buttons to locate the track you want to check.

2Press DATE RECORDED.

“No Date” appears if the internal clock has not been set or the track was recorded to another MD deck without a date and time stamp function.

Started Getting

Setting the clock 13 GB