MDs Playing

zYou can adjust the analog output signal level to the ANALOG OUT jacks and the PHONES jack

1While the deck is playing, press DISPLAY/CHAR (or DISPLAY) repeatedly until the line output adjustment display appears.

2Press DIGITAL REC LEVEL/ANALOG OUT LEVEL +/– on the remote repeatedly to adjust the output signal level (from –20.0 dB to 0.0 dB).

Note

When you eject the MD or turn off the deck, the output level is reset to the factory setting (0.0 dB).

To change the display during playing

Press DISPLAY/CHAR (or DISPLAY) repeatedly to change the display.

Each press of the button changes the display as follows:

Track number and elapsed time of the current track

r

The contents of a program (only when “PGM” lights up)

r

Disc name and track name

r

Level of the output signal

r

Pitch display r

DF (digital filter) display

zYou can check the remaining time

Press TIME during playback. Each press of the button changes the display as follows:

Track number and elapsed time of the current track

r

Track number and remaining time of the current track

r

Remaining time of all recorded tracks

zYou can check the track name while playing (only when the track name is recorded) Z

Press SCROLL.

The track name appears and scrolls. While the track name is scrolling, press the button again to pause scrolling, and again to continue scrolling.

Playing a specific track

While the deck is playing or stopped, use the procedure below to quickly play any track.

` / 1

Z

Number buttons

AMS

>25

M.SCAN

H X x

./> . > z

m M

X . >

N

Locating a track with AMS1)

To go to

Do the following:

 

 

The next or a succeeding track

Turn AMS clockwise (or press

during play

> repeatedly).

 

 

A preceding track during play

Turn AMS counterclockwise

(or press .repeatedly).

 

 

 

The beginning of the current

Turn AMS counterclockwise

track during play

(or press .once).

 

 

 

Turn AMS (or press ./

A specific track while the

>repeatedly) until the track

number you want to go to

deck is stopped

flashes in the display, then

 

 

press AMS or N.

 

 

A specific track by scanning

Press M.SCAN before you

start playing. When you find

each track for six to twenty

the track you want, press H

seconds (Music Scan) Z

to start playing.

 

 

 

1) Automatic Music Sensor

 

zYou can locate the last track of the MD quickly

While the deck is stopped, turn AMS counterclockwise (or press

. once).

zIf you locate a track while the deck is stopped or paused

The deck will still be stopped or paused at the beginning of the located track.

GB 24 Playing an MD/Playing a specific track