zYou can extend the playing time during Music Scan

1While the deck is stopped, press MENU/NO twice. “Setup Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “M.Scan” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) to select the playing time within a range of six to twenty seconds (in one second steps), then press AMS or YES.

4Press MENU/NO.

Playing a track by entering the track number Z

Press the number button(s) to enter the track number of the track you want to play.

To enter a track number over 25

1Press >25.

2Enter the corresponding digits.

To enter 0, press 10 instead.

Examples:

•To play track number 30, press >25, then 3 and 10.

•To play track number 108, press >25 twice, then 1, 10, and 8.

zIf you enter a track number while the deck is paused

The deck will still be paused at the beginning of the track.

Locating a particular point in a track

You can locate a particular point in a track during play or play pause.

m/M

 

 

 

Locating a point while monitoring the

 

Playing

sound

 

 

 

During play, press down m/M until you reach the

 

MDs

point you want.

 

 

 

You will hear intermittent playing as the disc goes forward or in reverse. When you reach the point you want, release the button.

Notes

•If the MD reaches the end while you’re pressing M, the deck stops.

•Tracks that are only a few seconds long may be too short for monitoring. For such tracks, play the MD at normal speed.

Locating a point by observing the time indication

During play pause, press down m/Muntil you reach the point you want.

When you reach the point you want, release the button. To start playing, press N or X. No sound is output during this time.

zWhen “– Over –” appears in the display

The MD has reached the end while you’re pressing M. Turn AMS counterclockwise (or press .) or press mto go back.

Playing a specific track/Locating a particular point in a track 25 GB