8Press N or X.

Recording starts.

9Start playing the program source.

Operations you may want to do during recording

To

Press

 

 

Stop recording

x

 

 

Pause recording

X

 

 

Resume recording after

Nor X

pausing

 

 

 

Eject the MD

OPEN/CLOSE Aafter

stopping recording

 

 

 

To change the display while recording

Press DISPLAY/CHAR (or DISPLAY) repeatedly to change the display.

Each press of the button changes the display as follows:

Track number and recorded time of the current track

r

Level of the input signal1)

r

Sampling frequency indication

“FS -- kHz” appears while the analog signal is input. r

DF (digital filter) display

1) “Analog In” appears while the analog signal is input.

When you pause recording

The track number increases by one. For example, if you paused recording while recording track 4, the track number will be 5 when you resume recording.

To prevent accidental erasure of the recorded material

To protect an MD recording, slide the record-protect tab in the direction of the arrow (see illustration below) to open the slot. To enable re-recording, close the slot.

Record-protect tab

Slide in the direction of arrow

zYou can play the tracks you have just recorded

Press N immediately after stopping recording.

The deck starts to play from the first track of the material just recorded.

zYou can play from the first track of the MD after recording

1Press x again after stopping recording.

2Press N.

The deck starts to play from the first track of the MD.

Note

You cannot record over existing material when Shuffle Play (page 27) or Program Play (page 27) has been selected. “Impossible” appears in the display at this time.

MDs to Recording

Recording to an MD 15 GB